2709
LIME BASE PLASTER
Formerly 102
Preserving values, conserving treasures.
For renovation of historic buildings. In- & outdoors.
- Traditional limestone base plaster, with high elasticity: Does not crack. Ideal for repairing damaged areas over various substrates during renovations.
- 1,2mm grain size gives a coarse look.
- Breathable, for a good room climate.
- High pH-value prevents mould growth.
- Cement-reduced (<3%): for optimum durability of the lime on damp walls.
Area of application
- Outdoors: wall + ceiling
- Indoor: wall + ceiling
- Vapour permeable
- Suitable for monuments and historical buildings
Heating and cooling area
- Wall + Ceiling
Processing method
- For hand and machine processing
- For new construction and reconstruction of historical buildings.
- For in- & outdoors.
- As a separating layer, e.g. on top of hourdis ceilings before concreting.
Price list
Code
Packaging
Code
BC2 102 25 12 00VN
Packaging
25 kg
RECOMMENDED SYSTEM PRODUCTS
Processing details
Learn more about technical details for processing this product.
Substrate requirement
The substrate must comply with the applicable standards, must be solid, free of loose particles, free of dust, paint, residues of demoulding products and efflorescence. It must be sufficiently rough, dry and evenly absorbent. The surface shall not be frozen or water-repellent. The substrate shall be stable in volume.
Substrate preparation
Depending on the absorbency of the substrate and the climatic conditions, it needs to be moistened. Apply Lime spray on the old substrate. If necessary, modify non-standard substrates by a suitable method to achieve the desired properties. Smooth unevenness of substrate with suitable Cemix materials and allow to dry and cure. The substrate shall comply with applicable codes, standards, or material manufacturer's recommendations.
Preparation of the mixture
Prepare the material by pouring the dry mixture into the prescribed amount of water and mixing it. Use potable water or water complying with EN 1008 to mix the mixture. Mix using a drum mixer or slow speed propeller mixer. Mix to a homogeneous, lump-free mixture and leave to rest. Then mix again briefly. Use suitable machinery when processing by machine.
Water demand
![CEMIX_blue_handling_water-quantity_25kg_4,75-5,75l](/icons/4744/image-thumb__4744__productIconImage/CEMIX_blue_handling_water_quantity_25kg_4_75_5_75l.png)
Quantity | Liters (Min) | Liters (Max) |
---|---|---|
1 kg | 0,19 l | 0,23 l |
25 kg | 4,75 l | 5,75 l |
Mixing
![CEMIX_blue_handling_swirl_5min800x](/icons/4988/image-thumb__4988__productIconImage/CEMIX_icons_25x25mm_blue_48.png)
![CEMIX_blue_handling_rest_3min](/icons/4656/image-thumb__4656__productIconImage/CEMIX_blue_handling_rest_3min_1_.png)
Processing instructions
Apply the plaster to the surface with a trowel or other suitable tool. Then roughly flatten the surface with a feather edge or lath or trowel to the required level. After the plaster has set, trowel the surface to the desired flatness. The minimum curing time of the core plaster is considered to be 1 day per 1 mm of applied layer. The plaster forms a base and levelling layer for the stucco plaster with a paint finish.
Application thickness
![CEMIX_blue_techdata_20_5mm](/icons/4823/image-thumb__4823__productIconImage/CEMIX_blue_techdata_20_5mm.png)
Minimum layer thickness | 5 mm |
---|---|
Recommended layer thickness | 15 mm |
Maximum layer thickness | 20 mm |
Consumption
![CEMIX_blue_techdata_trowel_cca_1,4kg-1mm](/icons/66628/image-thumb__66628__productIconImage/CEMIX_icon_blue_CMYK_blue_techdata_trowel_cca_1%2C4kg-1mm.png)
Yield
Material consumption | at | unit | Yield |
---|---|---|---|
25 kg | 15 | mm | 1,19 m² |
Working time (potlife)
![CEMIX_blue_handling_trowel_180min](/icons/4680/image-thumb__4680__productIconImage/CEMIX_blue_handling_trowel_180min.png)
180 min
Treatment after application
After application, the direct negative effects of sun, heat, humidity and draughts should be avoided. Protect from frost and rain. Direct heating of the surface is prohibited.
Tool and cleaning instructions
Wash off tools with water immediately after finishing work. Clean dried residues mechanically.
References
Technical parameters
Main binder | Lime hydrate |
Made of material | Mineral filler, hydraulic binder, lime hydrate, additives improving the processing and useful properties of the plaster. |
Flammability class | A1 |
Max. grain size | 1,2mm |
Thermal conductivity λ in W/(m.K) | 0.49 |
Water vapour diffusion resistance factor µ | 20 |
Dry bulk density in Kg/m³ | 1350 |
Dry bulk density in Kg/m³ to | 1550 |
Download
Contact: Can we help you?
Ask us your question. Write to us whenever you want. We will reply within 48 working hours.
Telephone 800 022 848
Contact us on the toll-free Customer hotline
- Opening hours: weekdays 7:30 a.m.–3:00 p.m.
- Email: info@cemix.cz