1515
KONTAKT CT
Formerly New (available during the year).
2 in 1 so save time and money
Reliable corrosion protection and adhesion bridge in one
- Increases the adhesion of concrete repair mortars, making it suitable for heavy-duty applications such as industrial floors.
- Suitable for providing corrosion protection and good adhesion in one step.
- Immediate application of the next layer (wet on wet), no waiting time.
- Due to its high active ingredient content, it adheres well to almost any surface.
Area of application
- Outdoor: floor + wall + ceiling
- Indoor: floor + wall + ceiling
- For plinth
Heating and cooling area
- Floor + Wall
Processing method
- For hand processing
- It can be used to ensure the appropriate adhesive strength of the mortar used to repair concrete structures and to ensure the corrosion protection of reinforcing bars.
Price list
Code
Packaging
Code
9005561106766
Packaging
5 kg
RECOMMENDED SYSTEM PRODUCTS
Processing details
Learn more about technical details for processing this product.
Substrate requirement
The substrate must comply with the applicable standards, must be solid, free of loose particles, free of dust, paint, residues of demoulding agents and efflorescence. It must be sufficiently rough, dry and evenly absorbent. The surface shall not be frozen and water-repellent. The minimum substrate cohesion shall be 1,5 MPa and the concrete quality C 20/25. Coat the exposed and cleaned reinforcement with Cemix protective coating.
Substrate preparation
Apply the adhesive bridge to the surface in a thin layer using a brush or broom. The exposed steel inserts are carefully covered with the material on all sides. The repair mortar is applied to the wet adhesive bridge (wet on wet) in the required layer thickness. If the adhesive bridge dries out, another layer must be applied.
Preparation of the mixture
Prepare the material by pouring the dry mixture into the prescribed amount of water and mixing it. Use potable water to mix the mixture. Mix using a slow-speed mixer. Mix to a homogeneous, lump-free mixture and leave to rest. Then mix again briefly.
Water demand
| Quantity | Liters (recommended) |
|---|---|
| 5 kg | 1,65 L |
Mixing
Processing instructions
Contaminated, damaged, decaying and dusty parts must be removed. The reinforcing bars must be exposed to the necessary extent and their surface must be mechanically cleaned of corroded parts.
Consumption
Working time (potlife)
1 h
Treatment after application
The bonding bridge dries depending on the moisture absorption of the base surface and the humidity and temperature of the air. Apply the next layer of material only to the still wet bonding bridge! Do not wet the bonding bridge afterwards, if it has dried out, a new layer must be applied.
Technical parameters
| Main binder | Grey cement |
| Full load after | 7 d |
| Density in Kg/m³ | 1700 |
| Release of corrosive substances | CT |
Download
Contact: Can we help you?
Ask us your question. Write to us whenever you want. We will reply within 48 working hours.
Telephone 800 022 848
Contact us on the toll-free Customer hotline
- Opening hours: weekdays 7:30 a.m.–3:00 p.m.
- Email: info@cemix.cz