4613
CLAY FINISHING PLASTER FINE
For environmentally conscious plastering on any wall material.
Natural clay. Healthy room climate for everybody.
- With 1,2mm grain size for grainy surface structure.
- Increases natural living comfort: breathable, moisture-balancing, room climate regulating, heat-storing.
- Absorbs pollutants and odours: purifies the indoor air.
- Contains only natural materials: For ecological construction (e.g. wood buildings, straw houses).
- Much lower carbon footprint than cement and lime mortars.
Area of application
- Indoor: wall + ceiling
- Suitable for monuments and historical buildings
- Vapour permeable
Processing method
- For hand processing
- For finishing surface of the underlying clay core plasters.
Price list
Code
Packaging
Code
BC3 433 25 12 00VN
Packaging
25 kg
RECOMMENDED SYSTEM PRODUCTS
Processing details
Learn more about technical details for processing this product.
Substrate requirement
The substrate must comply with the applicable standards, must be solid, free of loose particles, free of dust, paint, residues of demoulding substances and efflorescence. It must be sufficiently rough, dry and evenly absorbent. The surface shall not be frozen or water-repellent. The substrate must be stable in volume.
Substrate preparation
Depending on the absorbency of the substrate and the climatic conditions, it needs to be moistened. Coat the substrate with Cemix remediation underlay. If necessary, treat non-standard substrates with a suitable method to achieve the desired properties. The substrate must comply with applicable regulations, standards or material manufacturer's recommendations.
Preparation of the mixture
Prepare the material by pouring the dry mixture into the prescribed amount of water and mixing it. Use potable water or water complying with EN 1008 to mix the mixture. Mix using a slow speed propeller mixer. Mix to a homogeneous, lump-free mixture and leave to rest. Then mix again briefly. Use suitable machinery when processing by machine.
Water demand
![CEMIX_blue_handling_water-quantity_25kg_5,5-6,25l](/icons/4753/image-thumb__4753__productIconImage/CEMIX_blue_handling_water_quantity_25kg_5_5_6_25l.png)
Quantity | Liters (Min) | Liters (Max) |
---|---|---|
1 kg | 0.22 L | 0.25 L |
25 kg | 5.5 L | 6.25 L |
Mixing
![CEMIX_blue_handling_swirl_5min800x](/icons/4988/image-thumb__4988__productIconImage/CEMIX_icons_25x25mm_blue_48.png)
![CEMIX_blue_handling_rest_5min](/icons/4600/image-thumb__4600__productIconImage/92_4x.png)
Processing instructions
Apply the plaster to the surface with a stainless steel trowel or other suitable tool. Level it to the desired level in a min. layer thickness. After the material has tightened and is pressure-resistant, smooth the surface with a felt and then with a foam trowel while sprinkling with water. (for a uniform surface appearance). The plaster forms a base layer for Cemix coatings.
Application thickness
![CEMIX_blue_techdata_4_2mm](/icons/4848/image-thumb__4848__productIconImage/CEMIX_blue_techdata_4_2mm.png)
Minimum layer thickness | 2 mm |
---|---|
Recommended layer thickness | 3 mm |
Maximum layer thickness | 4 mm |
Consumption
![CEMIX_blue_techdata_trowel_1,5kg-1mm](/icons/66632/image-thumb__66632__productIconImage/CEMIX_icon_blue_CMYK_blue_techdata_trowel_cca_1%2C5kg-1mm.png)
Yield
Material consumption | at | unit | Yield |
---|---|---|---|
25 kg | 3 | mm | 5.56 m² |
Working time (potlife)
![CEMIX_blue_handling_trowel_180min](/icons/4680/image-thumb__4680__productIconImage/CEMIX_blue_handling_trowel_180min.png)
180 min
Treatment after application
After application, the direct negative effects of sun, heat, humidity and draughts should be avoided. Protect from frost and rain. Direct heating of the surface is prohibited.
Tool and cleaning instructions
Wash off tools with water immediately after finishing work. Clean dried residues mechanically.
References
Technical parameters
Main binder | Clay |
Made of material | Aggregate, natural clay. |
Flammability class | A1 |
Max. grain size | 1,2mm |
Adhesion after dry storage in ≥N/mm²(ETAG004) | 0.1 |
Thermal conductivity λ in W/(m.K) | 0.52 |
Water vapour diffusion resistance factor µ | 25 |
Dry bulk density in Kg/m³ | 1400 |
Dry bulk density in Kg/m³ to | 1600 |
Download
Contact: Can we help you?
Ask us your question. Write to us whenever you want. We will reply within 48 working hours.
Telephone 800 022 848
Contact us on the toll-free Customer hotline
- Opening hours: weekdays 7:30 a.m.–3:00 p.m.
- Email: info@cemix.cz