1500
CONTACT CEMENT
For problematic substrates with high adhesion requirements.
For bonding concrete and screed
- High adhesion, easy application.
- For problematic substrates, non-absorbent or very smooth substrates (e.g. smooth concrete, ceramics, umakart, metal sheet, etc.).
- Reliably reduces and evens out the absorption of substrates, for concrete and screeds.
- With sand, increases the adhesion of applied materials.
Area of application
- Outdoor: floor + wall + ceiling
- Indoor: floor + wall + ceiling
Heating and cooling area
- Floor + Wall
Processing method
- For hand processing
- Bonding bridge for pre-treatment and improvement of adhesion of smooth and non-absorbent substrates such as smooth concrete, ceramic shards, tiles, umakart, sheet metal, extruded polystyrene, etc.
- Suitable for the production of bonded screeds.
Price list
Code
Packaging
Code
BC1 201 25 07 00VN
Packaging
25 kg
RECOMMENDED SYSTEM PRODUCTS
Processing details
Learn more about technical details for processing this product.
Substrate requirement
The substrate must comply with the applicable standards, must be solid, free of loose particles, free of dust, paint, residues of demoulding products and efflorescence. It must be sufficiently rough, dry and evenly absorbent. The surface shall not be frozen or water-repellent. The substrate must be stable in volume and have the required flatness.
Substrate preparation
Depending on the absorbency of the substrate and the climatic conditions, it is necessary: degrease very smooth substrates (e.g. glazed tiles, umakart, etc.), lightly roughen with sandpaper.
Treat metal substrates with an anti-corrosion coating Cemix 1600.
When using the contact bridge on bonded screeds, apply the Cemix 1500 contact bridge on cohesive matt damp concrete moistened with water.
Preparation of the mixture
Add the dry mixture into the prescribed amount of water. Use potable water or water complying with EN 1008. Mix using a slow speed propeller mixer to a homogeneous mixture without lumps. Leave to rest. Then mix again briefly.
Water demand
![](/icons/4691/image-thumb__4691__productIconImage/CEMIX_blue_handling_water_quality_25g_ca_9_5_L.png)
Quantity | Liters (recommended) |
---|---|
1 kg | 0.38 L |
25 kg | 9.5 L |
Mixing
![CEMIX_blue_handling_swirl_5min800x](/icons/4988/image-thumb__4988__productIconImage/CEMIX_icons_25x25mm_blue_48.png)
![CEMIX_blue_handling_rest_3min](/icons/4656/image-thumb__4656__productIconImage/CEMIX_blue_handling_rest_3min_1_.png)
Processing instructions
Apply the substance with a roller or brush in an even layer on the prepared substrate. Stir the mixture occasionally during the painting process so that no coarse particles are deposited. Subsequently, apply additional material to the finished coating after a minimum of 24 hours.
When used as a contact bridge for jointed (bonded) screeds, apply the screed immediately after application - to a fresh contact bridge.
Application thickness
![CEMIX_blue_techdata_0,7_1,0 mm](/icons/4609/image-thumb__4609__productIconImage/blue_techdata_0_7_1_0mm.png)
Minimum layer thickness | 0.7 mm |
---|---|
Recommended layer thickness | 0.8 mm |
Maximum layer thickness | 1 mm |
Consumption
![CEMIX_blue_techdata_trowel_0,9kg](/icons/4602/image-thumb__4602__productIconImage/94_4x.png)
Yield
Material consumption | at | unit | Minimum yield | Maximum yield |
---|---|---|---|---|
25 kg | 1 | vrstvě | 20,83 m² | 27,78 m² |
Working time (potlife)
![CEMIX_blue_handling_trowel_120min](/icons/4598/image-thumb__4598__productIconImage/90_4x.png)
120 min
Treatment after application
The direct negative effects of sun, heat, humidity and draughts should be avoided after application. Protect from frost and rain. Direct heating of the surface is prohibited.
Tool and cleaning instructions
Wash off tools with water immediately after finishing work. Clean dried residues mechanically.
References
Technical parameters
Main binder | Grey cement |
Made of material | aggregate, redispersible polymer and other additives improving the processing and utility properties of the product. |
Max. grain size | 0,7mm |
Adhesive tensile strength on concrete substrate in ≥N/mm² | 1.5 |
Download
Contact: Can we help you?
Ask us your question. Write to us whenever you want. We will reply within 48 working hours.
Telephone 800 022 848
Contact us on the toll-free Customer hotline
- Opening hours: weekdays 7:30 a.m.–3:00 p.m.
- Email: info@cemix.cz